HYDRAULIC INFO

HYDRAULIC POWER PACK
PROPORTIONAL VALVES
HYDRAULIC OIL
HYDRAULIC PUMP


HYDRAULIC POWER PACK

Back to top
Q : What is the best hydraulic tank capacity if my main pump flow is 100 LPM?
A : Hydraulic tank oil capacity must be at least 3 times of pump flow rate (or cylinder vol/time) which ever bigger. Because of info only on pump flow rate is given, the best tank oil capacity must be at least 300 LITRES OR BIGGER.
 

PROPORTIONAL VALVES

Back to top
Q : My hydraulic system using mineral base hydraulic oil VG46 and using proportional directional valve with maximum operating pressure of 100 BARS. What is the hydraulic oil cleanliness require?
A : ISO4406(1999) CODE 17/15/12 or batter. To achieved use 3 microns filter at least one unit with 200 beta ratio fiberglass materials.
 

HYDRAULIC OIL

Back to top
Q : What is best viscosity gred for mineral base oil which use in Malaysia construction site?
A : For Malaysia and hydraulic machine operating at site, use ISO VG68.
 
Q : What is the maximum water contain for mineral base hydraulic oil?
A : 100PPM OR 0.01%
 

HYDRAULIC PUMP

Back to top
Q : Do we need to service the hydraulic piston pump during hydraulic power unit servicing?
A : YES. Hydraulic piston pump highly recommend be service at least once a year. All internal damage or wear-off part, seals and bearings must be change during this pump service.
 
Q : We are using Bosch Rexroth piston pump model A10VSO28DR/31R-PPA12NOO. The pump DR setting is 200 Bars, what is the best setting for the safety relief valve?
A : The safety relief valve must set 20 Bars higher that pump DR setting. 200 Bar + 20 Bars = 220 BARS.
 
Q : Our hydraulic pump size is 20 cubic centimeter/revolusion. What is this pump flow if this pump drive by 1500 RPM electrical motor?
A : 20(CCM/REV.) X 1500 (RPM) / 1000 = 30 LPM
 

10548768 Visitors10548768 Visitors10548768 Visitors10548768 Visitors10548768 Visitors10548768 Visitors10548768 Visitors10548768 Visitors